Installation Guides

Roundit 2000 FR - Assembly Guide

The sleeve Roundit 2000 FR can be used as a:

  • mechanical protection and bundling for electrical harnesses
  • over-protection in areas of high maintenance activity
  • added protection during the integration of the harnesses for harnesses manufactured without protection

Use of Roundit 2000 FR must be thought of in a global accessible system, including access of the cable ties and fixation to give the possibility to make repairs and modifications.

Roundit 2000 NX - Assembly Guide

The sleeve Roundit 2000 NX can be used for :

  • mechanical protection and bundling for electrical harnesses in all aircraft zones
  • over-protection in areas of high maintenance activity
  • added protection during the integration of the harnesses on the aircraft for harnesses manufactured without protection

Use of Roundit 2000 NX has to be seen as part of a global accessible system, including access of the cable ties and fixation to give the possibility of making repairs and modifications.

Roundit 2000 NX EMI - Assembly Guide

Roundit 2000 NX EMI is a two-layer product combining Mechanical Protection and EMI shielding.

  1. The outer layer is made of a flexible self-wrapping textile sleeve: Roundit 2000 NX specified EN 6049-006 (Woven blend of textured meta-aramid yarn & PPS Monofilament with an anti-fray impregnation) 
  2. The inner layer is made of a flat braid made of nickel platted copper.
  3. The two layers are sewn with meta-aramid yarns onto the inside of Roundit 2000 NX. The sleeve 2000 NX EMI is endowed with a blue tracer to make the difference with the sleeve Roundit 2000 NX.

Two versions of Roundit 2000 NX EMI are available: -Roundit 2000 NX EMI with PTFE, used to avoid contact between cables and the metal braid -Roundit 2000 NX EMI without PTFE, used when the cables are already protected by Nomex or by a PTFE Tape.

Roundit 2000 V0 - Assembly Guide

The sleeve Roundit 2000 V0 can be used as a:

  • mechanical protection and bundling for electrical harnesses
  • over-protection in areas of high maintenance activity
  • added protection during the integration of the harnesses for harnesses manufactured without protection

Use of Roundit 2000 V0 must be thought of in a global accessible system, including access of the cable ties and fixation to give the possibility to make repairs and modifications.

Roundit EMI FMJ - Assembly Guide

The sleeve Roundit EMI FMJ can be used for a:

  • EMI protection and bundling for electrical harnesses in all aircraft zones
  • Open solution for modification in the original harness
  • Repair of EMI shielding

Use of Roundit EMI FMJ has to seen as part of a global accessible system, including access to the cable ties and fixation to give the possibility of making repairs and modifications.

Roundit V0 EMI - Assembly Guide

The sleeve Roundit V0 EMI can be used for a:

  • EMI protection and bundling of electrical harnesses in all railcar zones
  • Open solution for modification of the original harness
  • Repair of EMI shielding

Use of Roundit V0 EMI has to be seen as part of a global accessible system, including access to the cable ties and fixation to give the possibility of making repairs and modifications.

6 Item(s)